Table of Contents
Advertisement
:DATA:FEED:CONTrol:BUF3[:STATe]
:DATA:FEED:CONTrol:BUF3[:STATe] {NEVer|ALWays}
Syntax
:DATA:FEED:CONTrol:BUF3[:STATe]?
Description
Determines whether the measurement data is fed into data buffer 3 never or always.
Parameters
ALWays
NEVer (initial
value)
Query response
{NEV|ALW}<newline><^END>
Related commands
:DATA:FEED:BUF1 on page 194
:DATA:POINts:BUF1 on page 200
Equivalent key
[
Save/Recall
sequence
Chapter 10
Feeds the measurement data into the data buffer 3 specified with
BUF3 each time a measurement is performed.
Does not feed the measurement data into the data buffer specified
with BUF3.
] - CATALOG - SAVE DATA - START LOG
Command Reference
E4981A SCPI Commands
Description
197
Advertisement
Table of Contents
