Table of Contents
Advertisement
Command Reference
E4981A SCPI Commands
:SYSTem:TZONe
Syntax
:SYSTem:TZONe <hour>[,<minute>]
:SYSTem:TZONe?
Description
Configures the time zone. Sets the time difference from Greenwich mean time (GMT).
Parameter
NOTE
The value of this command is not changed with
changed with Factory Default reset (available only through Front Panel).
Query response
{"string"}<newline><^END>
string: {hour, minute}
Equivalent key
[
System
INCR+|MINUTE DECR-|HOUR DECR--
282
Initial (Factory set) value
Range
Unit
Resolution
Initial (Factory set) value
Range
Unit
Resolution
] - SYSTEM CONFIG - TIME ZONE - HOUR INCR++|MINUTE
<hour>
0
-12 to 15
hours
1
<minute>
0
-45 to 45
minutes
15
*RST
and
:SYSTem:PRESet
and is only
Chapter 10
Advertisement
Table of Contents
