Format[:Data] - Keysight Technologies E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:FORMat[:DATA]

Syntax :FORMat[:DATA] {ASCii|REAL}
:FORMat[:DATA]?
Description Sets the transfer format of data read out using the following commands:
•
•
•
•
•
•
•
For details on the data transfer formats, refer to
Parameters
ASCii (initial
value)
REAL
Query response {ASC|REAL}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
sequence
222
:FETCh? on page 217
:READ? on page 226
*TRG on page 169
:DATA[:DATA] on page 206
[:SENSe]:CORRection:DATA on page 236
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:DATA? on page 249
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:DATA? on page 252
Specifies the ASCII data transfer format.
Specifies the 64-bit real number data transfer format.
"Data Transfer Format" on page
Description
66.
Chapter 10