Calculate1:Comparator:count:multiple:data - Keysight Technologies E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate1:COMParator:COUNt:MULTiple:DATA?

Syntax :CALCulate1:COMParator:COUNt:MULTiple:DATA?
Description Reads out each count value of BIN1 to BIN9, OUT_OF_BINS, and AUX_BIN of the
selected channel.
When the multi-correction function is turned off, reads out normal count values (common
value for all channels). In other words, this command has the same function as the
:CALCulate1:COMParator:COUNt:DATA?
Reads out all BIN count values regardless of the ON/OFF state of each BIN (set with the
:CALCulate1:COMParator:PRIMary:BIN{1-9}:STATe
Parameters
{numeric 1}
{numeric 2}
{numeric 3}
{numeric 4}
{numeric 5}
{numeric 6}
{numeric 7}
{numeric 8}
{numeric 9}
{numeric 10}
{numeric 11}
Query response {numeric 1},...,{numeric 11}<newline><^END>
Related commands :CALCulate1:COMParator:COUNt:MULTiple:OVLD? on page 179
[:SENSe]:CORRection:MULTiple[:STATe] on page 241
[:SENSe]:CORRection:MULTiple:CHANnel on page 239
:CALCulate1:COMParator:COUNt[:STATe] on page 180
:CALCulate1:COMParator:COUNt:CLEar on page 176
:CALCulate1:COMParator:COUNt:DATA? on page 177
:CALCulate1:COMParator[:STATe] on page 187
:CALCulate1:COMParator:PRIMary:BIN{1-9}:STATe on page 183
Equivalent key No equivalent key is available on the front panel.
sequence
178
command.
The count value of BIN1 of selected channel.
The count value of BIN2 of selected channel.
The count value of BIN3 of selected channel.
The count value of BIN4 of selected channel.
The count value of BIN5 of selected channel.
The count value of BIN6 of selected channel.
The count value of BIN7 of selected channel.
The count value of BIN8 of selected channel.
The count value of BIN9 of selected channel.
The count value of OUT_OF_BINS of selected channel.
The count value of AUX_BIN of selected channel.
command). (Query only)
Description
Chapter 10