Calculate1:Comparator:count[:State] - Keysight Technologies E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate1:COMParator:COUNt[:STATe]

Syntax :CALCulate1:COMParator:COUNt[:STATe] {ON|OFF|1|0}
:CALCulate1:COMParator:COUNt[:STATe]?
Description Turns ON/OFF the BIN counter function of the comparator function.
If you turn on this function, the number of DUTs sorted into each BIN based on the
comparator sorting result is counted. The maximum count is 999999. If this is exceeded,
the count value will not be updated but remain at 999999.
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Related commands :CALCulate1:COMParator:COUNt:CLEar on page 176
:CALCulate1:COMParator:COUNt:DATA? on page 177
:CALCulate1:COMParator:COUNt:OVLD? on page 179
:CALCulate1:COMParator:COUNt:MULTiple:DATA? on page 178
:CALCulate1:COMParator:COUNt:MULTiple:OVLD? on page 179
Equivalent key [
Display Format
sequence
180
Turns ON the BIN counter function.
Turns OFF the BIN counter function.
] - BIN COUNT - COUNT - COUNT ON|COUNT OFF
Description
Chapter 10