System:communicate:lan[:Self]:Configure; System:communicate:lan[:Self]:Control; System:communicate:lan[:Self]:Current:address - Keysight Technologies E4981A Programming Manual

:SYSTem:COMMunicate:LAN[:SELF]:CONFigure

:SYSTem:COMMunicate:LAN[:SELF]:CONFigure {AUTO|MANual}
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:CONFigure?
Description Sets the IP configuration setup method i.e. Auto/Manual.
Parameters
AUTO (Initial [Factory
set] value)
MANual
NOTE
The value of this command is not changed with
changed with Factory Default reset (available only through Front Panel).
Query response {AUTO|MAN}<newline><^END>
Equivalent key [
System
sequence

:SYSTem:COMMunicate:LAN[:SELF]:CONTrol?

Syntax :SYSTem:COMMunicate:LAN[:SELF]:CONTrol?
Description Returns the SOCKET control port number. If the parser is a SOCKET, it will return a
number from 5000 to 5100. Otherwise, 0. (Query Only)
Query response {numeric}<newline><^END>
Equivalent key No equivalent key is available on the front panel.

:SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess

?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess?
Description Returns the current IP address. (Query Only)
Query response {"string"}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
Chapter 10
Sets the IP configuration setup to auto mode.
Sets the IP configuration setup to manual mode.
] - SYSTEM CONFIG - IP CONFIG - AUTO|MANUAL
Command Reference
E4981A SCPI Commands
Description
*RST and :SYSTem:PRESet and is only
271