Table of Contents
Advertisement
[:SENSe]:CORRection:MULTiple:CHANnel
[:SENSe]:CORRection:MULTiple:CHANnel <numeric>
Syntax
[:SENSe]:CORRection:MULTiple:CHANnel?
Description
Specifies a channel number used in the multi-correction function.
You can also specify the channel number via the scanner interface.
NOTE
A channel number specified through the interface overrides a channel number selected
with this command.
Parameters
Description
Range
Initial value
Resolution
If the specified parameter is out of the allowable setup range, an error occurs.
MAX or MIN can be used to specify the parameters.
Query response
{numeric}<newline><^END>
Equivalent key
[
Meas Setup
sequence
Chapter 10
The desired channel number.
0 to 255
0
1
] - CORRECTION - CH
Command Reference
E4981A SCPI Commands
<numeric>
239
Advertisement
Table of Contents
