Command Reference
E4981A SCPI Commands
:SYSTem:SCANner:TRIGger:VOLTage
Syntax
:SYSTem:SCANner:TRIGger:VOLTage <numeric>
:SYSTem:SCANner:TRIGger:VOLTage?
Description
Sets the scanner trigger input voltage.
Parameters
Description
Range
Initial (Factory
set) value
Unit
Resolution
NOTE
The value of this command is not changed with
changed with Factory Default reset (available only through Front Panel).
CAUTION
The product may get damaged if incorrect voltage is set to Scanner Trigger. Take caution
while changing the Scanner Trigger voltage.
Query response
{numeric}<newline><^END>
Equivalent key
No equivalent key is available on the front panel.
280
The value of the scanner trigger input voltage
5 to 15
15
V (voltage)
100m
*RST
<numeric>
and
:SYSTem:PRESet
and is only
Chapter 10