[:Sense]:Correction:multiple:ckit:stan3[:State] - Keysight Technologies E4981A Programming Manual

Command Reference
E4981A SCPI Commands

[:SENSe]:CORRection:MULTiple:CKIT:STAN3[:STATe]

Syntax [:SENSe]:CORRection:MULTiple:CKIT:STAN3[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:MULTiple:CKIT:STAN3[:STATe]?
Description Determines whether to define the standard values for LOAD correction for each channel
individually when using the multi-correction function (set to ON with the
[:SENSe]:CORRection:MULTiple[:STATe]
Parameters
ON or 1
OFF or 0
(initial value)
Query response {1|0}<newline><^END>
Related commands [:SENSe]:CORRection:MULTiple[:STATe] on page 241
[:SENSe]:CORRection:CKIT:STAN3[:DATA] on page 231
[
Equivalent key
Meas Setup
sequence
240
Enables channel-by-channel value definition.
Disables channel-by-channel value definition (defines the same
values for all channels).
] - CORRECTION - LOAD REF - MULTI|SINGLE
command).
Description
Chapter 10