Calculate1:Comparator:count:multiple:ovld; Calculate1:Comparator:count:ovld - Keysight Technologies E4981A Programming Manual

:CALCulate1:COMParator:COUNt:MULTiple:OVLD?

:CALCulate1:COMParator:COUNt:MULTiple:OVLD?
Syntax
Description Reads out the overload count value of the selected channel.
When the multi-correction function is turned off, reads out normal count value (common
value for all channels). In other words, this command has the same function as the

:CALCulate1:COMParator:COUNt:OVLD?

Query response {numeric}<newline><^END>
Related commands :CALCulate1:COMParator:COUNt:MULTiple:DATA? on page 178
[:SENSe]:CORRection:MULTiple[:STATe] on page 241
:CALCulate1:COMParator:COUNt[:STATe] on page 180
:CALCulate1:COMParator:COUNt:CLEar on page 176
:CALCulate1:COMParator[:STATe] on page 187
No equivalent key is available on the front panel.
Equivalent key
sequence
:CALCulate1:COMParator:COUNt:OVLD?
Syntax :CALCulate1:COMParator:COUNt:OVLD?
Description Reads out each overload count value. (Query only)
Query response {numeric}<newline><^END>
Related commands :CALCulate1:COMParator:COUNt:DATA? on page 177
:CALCulate1:COMParator:COUNt[:STATe] on page 180
:CALCulate1:COMParator:COUNt:CLEar on page 176
:CALCulate1:COMParator[:STATe] on page 187
Equivalent key No equivalent key is available on the front panel.
sequence
Chapter 10
Command Reference
E4981A SCPI Commands
command. (Query only)
179