Preparation Before Commissioning; Scope Of Delivery; Sinumerik 808D Advanced Control System; System Overview - Siemens SINUMERIK 808D ADVANCED Commissioning Manual

2

Preparation before commissioning

2.1

Scope of delivery

2.1.1

SINUMERIK 808D ADVANCED control system

2.1.1.1

System overview

The SINUMERIK 808D ADVANCED control system is an economic numerical control system for milling or turning machines.
The SINUMERIK 808D ADVANCED controller, coupled with the high performance SINAMICS V70 feed/spindle drive,
SIMOTICS S-1FL6 feed motor, and SIMOTICS M-1PH1 main motor, is able to control up to five axes including analog/digital
spindles.
Control system versions
Control system
Applicable machine tools
PPU PPU variants
Applicable software ver-
sion
Panel layout
Operator panel with Eng-
lish keys
Operator panel with Chi-
nese keys
MCP Configurable MCPs are available in the following versions:
Horizontal MCP, with English keys and override switches
•
Horizontal MCP, with Chinese keys and override switches
•
Horizontal MCP, with Chinese keys and a reserved slot for the handwheel (applicable to turning ma-
•
chines only)
Vertical MCP, with English keys and a reserved slot for the handwheel
•
Vertical MCP, with Chinese keys and a reserved slot for the handwheel
•
Vertical MCP, with English keys and an override switch for the spindle
•
Vertical MCP, with Chinese keys and an override switch for the spindle
•
Number of Total
configurable
Standard axes
axes
Additional axes (license
required)
Communication with drive
Configurable drives
Configurable motors
√: available
Commissioning Manual
01/2017
SINUMERIK 808D ADVANCED T
Turning machines
PPU161.3 PPU160.2
V4.7.4 V4.7.4
Horizontal Vertical
√ √
√ √
Up to 5
3 3
2 2
Drive Bus interface
SINAMICS V70 feed/spindle drive
SIMOTICS S-1FL6/SIMOTICS M-
1PH1
SINUMERIK 808D ADVANCED M
Milling machines
PPU161.3 PPU160.2
V4.7.4 V4.7.4
Horizontal Vertical
√ √
√ √
Up to 5
4 4
1 1
Drive Bus interface
SINAMICS V70 feed/spindle drive
SIMOTICS S-1FL6/SIMOTICS M-
1PH1
17