Commissioning; Registering Your Device - Siemens SITRANS FM MAG 8000 IIoT Operating Instructions Manual

Wireless communication modules

Table of Contents

Commissioning

6.1

Before you register your device

• Install/mount the Wireless Communication Module Installing/mounting (Page 15)

• Connect the Wireless Communication Module Connecting (Page 21)

• Turn on the transmitter

Note

PIN must match the factory setting [1000]

Reset the PIN to factory setting [1000] before commissioning.

Note

Only use this procedure for first company account

Create further accounts through the web application: Adding additional users (Page 30).

Otherwise misalignments caused by spelling errors of "Company name" are possible.

Note

Change the serial number for MAG 8000 demo kits

The standard serial number for a MAG 8000 demo kit is always 123456H123. Change the serial

number to a unique identifier. The requirements for new serial number are:

• Length of max. 12 characters

• Must only consist of upper and lower case letters or numbers

Procedure

1. Register your device by going to IIoT web application registration

mag8000iiotwcmclaiming).

2. Enter the IMEI from a sticker on the Wireless Communication Module.

3. Enter the ICCID from the SIM card enclosure.

4. Enter the serial number from the nameplate of the transmitter.

SITRANS FM MAG 8000 IIoT Wireless Communication Module

Operating Instructions, 07/2022, A5E52070595A-AA

(http://www.siemens.com/

Table of Contents