Definity Logins For The Customer - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
B Set Up and Use of Customer Logins

DEFINITY logins for the customer

DEFINITY logins for the customer
In addition to the logins maintained in the Windows operating system, there are
customer level logins within the DEFINITY application that do NOT appear as
Windows logins. The default password should be changed by the customer during
installation.
Table B-4. DEFINITY customer logins
DEFINITY
customer logins
defty1
DEFINITY ONE or IP600 Release 10 provides enhanced login/password security
by adding a security feature that allows users to define their own DEFINITY
logins/passwords and to specify a set of commands for each login.
The system allows up to 14 simultaneous connections (logins) to
DEFINITY ONE or IP600. (DEFINITY ONE or IP600 can have 5
connections, Intuity AUDIX can have 4 connections, and the rest of the
connections are reserved for shell commands.)
Each DEFINITY ONE or IP600 login name can be customized
Password aging is an optional feature that the super-user administering the logins
can activate (see below).
NOTE:
If several users are logging in and out at the same time, a user may see the
message: Transient command conflict detected; please try later. After
the users have completed logging in or out, the terminal is available for use.
Comments
This is the customer level "super user"
login within the DEFINITY application. Its
use should be restricted to the system
administrator. This login can be used to
create additional DEFINITY logins. See the
DEFINITY command add login.
— Logins must be 3 to 6 alphabetic/numeric characters, or a
combination of both.
— A password must be from 4 to 11 characters in length and contain at
least 1 alphabetic and 1 numeric symbol.
Issue 6
December 2001
B-8
Default
password