Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
3
System Initialization
Power up and observe LEDs
3. Add parameter value.
4. Exit regedit.
For information on administering TFTP, see Chapter 4 in 4600 Series IP
Telephone LAN Administrator's Guide , 555-233-507. This document is included
on the R10 CD.
Power up and observe LEDs
When power is first applied to DEFINITY ONE or IP600, or when the system
reboots, the LEDs on the TN2314 circuit pack light according to a predefined
sequence. See
sequence.
Connect the laptop computer to
DEFINITY ONE or IP600
For this procedure, see
IP600'' on page
Start a Telnet session
See
''Via a Telnet session'' on page 2-31
Telnet session.
a. Double-click Directory
b. Enter "d:\lucentdata\tftproot" in the Value data box
c. Click OK
''LED boot sequence'' on page E-1
''Connect the laptop computer to DEFINITY ONE or
2-2.
for details on the power up
for an explanation of how to start a
Issue 6
December 2001
3-4