Add Pooled Modem; Settings For Modem Connected To Data Module - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
6 Hardware Additions

Add pooled modem

Add pooled modem
Modem pooling supports 2 types of conversion resources: integrated and
combined.
The integrated type requires a TN758 pooled modem circuit pack for each 2
conversion resources provided.
The combined type requires a port on a digital line circuit pack and a port on either
an 8-port or 16-port analog line circuit pack for each conversion resource
provided.
1.Determine the port assignment of the circuit packs to be added (if required).
2.Install the appropriate circuit packs in assigned carrier slot (if required).
3.For Paradyne 3800-Series modems:
4.For other types of modems, see the vendor's documentation.

Settings for modem connected to data module

1.Type add data-module next and press
2.Type pdm in the Type field.
3.Type x in the Port field.
4.Type dte in the Connected to field and press
5.Type add station next and press
6.Type 2500 in the Type field.
7.Type x in the Port field.
8.Type n in the Tests field and press
9.Type add modem-pool next and press
10.Type combined in the Group Type field.
11.Type 5 in the Hold Time (min) field.
12.Type two-way in the Direction field.
13.Type 9600 in the Speed field.
14.Type Full in the Duplex field.
15.Type async in the Synchronization field.
16.Type the port pair assignments in the Analog and Digital fields and press
Enter
a. Type AT&F&D2&S4\D3S2=128x7V2S7=60S85=1 and press
b. Type ATY0S10=100S78=2M0E0\N1&W and press
.
.
Enter
.
Enter
.
Enter
.
Enter
.
Enter
Issue 6
December 2001
6-22
.
Enter
.
Enter