Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
1
Install and Cable the Cabinet
Cable the Avaya IP600 system
Cable the two-cabinet Avaya IP600 system
NOTE:
Use the same process to add a third cabinet.
1. Remove the bottom panel and fan assembly from Cabinet B (port cabinet).
2. Remove the fan assembly from Cabinet A (processor cabinet).
3. Remove the right TDM/LAN bus terminator from Cabinet A, and install it at
the left end of the TDM/LAN bus on Cabinet B. See
1-30.
!
WARNING:
Make sure to install TDM/LAN bus terminators with the arrow on the
back pointing upward.
Issue 6
December 2001
1-29
Figure 1-14 on page