Administer Snmp; Configure Snmp Trap Destinations - Avaya DEFINITY ONE Installation And Upgrades

Internet protocol communications server

Hide thumbs Also See for DEFINITY ONE:

Table of Contents

Installation and Upgrades for DEFINITY ONE and

IP600 Internet Protocol Release 10 555-233-109

System Initialization

Administer SNMP

The SNMP agent is installed with DEFINITY ONE or IP600. By default, SNMP is

enabled. See

about enabling and disabling SNMP.

You can configure SNMP trap destinations, configure community strings, and start

and stop the SNMP subagent process. After the SNMP agent is configured, and

with Network Management System Interface (NMSI) software installed, a network

manager can monitor DEFINITY ONE or IP600 devices. The NMSI software can

automatically discover the DEFINITY ONE or IP600 devices in the network and

display icons for them in an NMS IP map.

To configure SNMP trap destinations:

1. From the DEFINITY ONE or IP600 home page, click SNMP Subagent

Administration.

The following page displays:

''Enable and Disable SNMP'' on page 3-27

December 2001

for more information

Show Quick Links

Table of Contents