Install The Emergency Transfer Panel - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
1 Install and Cable the Cabinet
Install emergency transfer panel and associated telephones

Install the emergency transfer panel

To install an 808A Emergency Transfer Panel:
1. Install the transfer panel on any mounting frame in either a vertical or
horizontal position. The housing has ears for screw-mounting and cutouts
for snap-mounting the unit in an 89-type mounting bracket.
2. Verify that dial tone is present at each trunk circuit.
Figure Notes
1. 808A emergency transfer panel
2. Circuit start selection switches
Figure 1-64. 808A emergency transfer panel
NOTE:
Install the panel so it can be accessed only by authorized personnel.
The location must meet standard environmental considerations such
as temperature and humidity.
EMERGENCY
TRANSFER
PANEL
POWER
TRUNK/TEST SWITCHES
CIRCUIT
1
1
2
3
2
4
5
3
6
BOTH SWITCHES MUST BE
7
THROWN TO ACTIVATE
4
8 TRUNK OPTION
9
5
10
12
TRANSFER TEST SWITCH
ACTIVATED
TRUNK IDENTIFICATION
TRUNK
LINE
TRUNK OPTION
LOOP GROUND
1
START START
2
NORMAL
OPERATION
LOC
EXT
808A
led808a LJK 040896
3. Trunk identification label
4. 25-pair male connector
Issue 6
December 2001
1-126