Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
1
Install and Cable the Cabinet
Check AC power and ground for DEFINITY ONE
Connect cabinet grounds and other grounds
Follow these additional grounding requirements:
The approved ground wire must be green, 6 AWG (#40) (16 mm
stranded wire. This is in addition to the ground wire in the AC power cord.
Bond all approved grounds at the single-point ground to form a single
grounding electrode system.
Install the ground block and ground wire on cabinets
1. Mount the ground block as shown in
Figure Notes
1. #12 x 1-inch shoulder screws
Figure 1-32. Ground block installation to right CMC panel
A
Figure
1-32.
2
2. Single-point ground block
Issue 6
December 2001
1-68
2
), copper,
2
1
indmingb RPY 012398