Multiple Integrated Recorded Announcements; Tn750C Announcement Circuit Pack - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
6 Hardware Additions

Multiple integrated recorded announcements

Multiple integrated recorded
announcements
DEFINITY ONE or IP600 provides 2 methods of integrated announcements. Both
can be used on the same system. The methods are:

''TN750C announcement circuit pack''

''CWY1 announcements''
NOTE:
The .wav files that contain the announcements on DEFINITY ONE or IP600 can be
used with the VAL (voice announcements on the LAN) circuit pack on other DEFINITY
systems only if the DEFINITY ONE or IP600 .wav file attributes match those used by
VAL. To use DEFINITY ONE or IP600 .wav files with VAL, they must be created with
the following attributes — PCM encoded, 8 bits per sample, 8 Khz per second
sampling rate, and single-channel (Mono) mode.
TN750C announcement circuit pack
The TN750C circuit pack contains on-board flash memory that provides internal
backup of announcements. Thus, the TN750C circuit pack does not require the
save and restore processes. TN750C announcements cannot be backed up and
restored to an external device with a DEFINITY ONE or IP600 system.
The TN750C circuit pack can replace a TN750 or TN750B. The difference in
operation is that the TN750C automatically restores and reports the availability of
announcements from its internal flash memory in 5 minutes, rather than the 40
minutes for the TN750 or TN750B.
If a circuit pack already has announcements in its flash memory, the yellow LED
flashes as the announcements copy to the voice RAM.
Add TN750C circuit packs
Follow this procedure to add the circuit packs:
1. Insert the TN750C into a vacant slot in a carrier.
2. Administer new announcements to that TN750C slot by executing the
change announcements <location> command.
3. Record the announcements, as described in DEFINITY Enterprise
Communications Server Release 10 Administrator's Guide (555-233-506).
4. Wait until the announcements copy from voice RAM to the on-board flash
memory (the yellow LED on the TN750C starts and then stops flashing).
This takes about 10 minutes.
Issue 6
December 2001
6-24