Completing The Machine Profile Screen For The Remote Machine (Via Audix) - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
4 Intuity AUDIX Digital Networking
Changing local machine information
Completing the Machine Profile screen for the
remote machine (via AUDIX)
Use the Machine Profile screen to enter networking information required for each
remote machine, such as address ranges and remote update information.
To enter networking information on the Machine Profile screen:
NOTE:
The Digital Network Machine Administration window must be completed for a remote
machine before completing the Machine Profile screen for that machine.
1. Start at the AUDIX command prompt screen.
2. Enter change machine remote_machine_name at the enter command:
prompt.
The system displays the Machine Profile screen for a remote machine,
page 1:
3. Complete the fields in this window using the information provided in
Table 4-5 on page
NOTE:
If you do not know the names of the remote machines, enter list
machines at the enter command: prompt. The system displays a
list of all machines administered on the system.
4-16.
NOTE:
The Machine Name, Type, Location, and Voice ID fields are display
only and cannot be changed.
Issue 6
December 2001
4-15