Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
2
Connectivity and Access to DEFINITY ONE or IP600
Creating physical connections
13. Leave the domain entry blank and click OK.
After a connection is established, a dialog box similar to the following
displays:
This indicates that the laptop is connected to the DEFINITY ONE or IP600
LAN. The dial-up connection is established.
Once the dial-up connection is established, the caller must use 1 of 3
access methods. See
Creating a physical connection via customer LAN
Customers may decide to install their LAN, which connects to the ethernet jack of
the processor interface cable. To configure DEFINITY ONE or IP600 as a node on
the customer's network, see
''Access methods'' on page
''Administer customer's LAN interface'' on page
Issue 6
December 2001
2-31.
3-25.
2-28