Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
3
System Initialization
License File Overview
Alarm Origination
Definity One or IP600 runs multiple application on the platform. All the
applications report the problems to GAM (Global Alarming Module) which in turn
call out through the modem to the designated number. This is different than the
INADS port on DEFINITY and needs to be configured using a BASH command
"oss". The steps involved are:
1. Telnet to Definity One or IP600 from the laptop, which is cabled to the
PCMCIA card.
2. Go to the "bash" shell from LAC by typing "bash".
3. On BASH, use "oss" command to set the alarm callout destination. The
format is:
"oss=18002422121,3,3"
To turn on alarm origination, On BASH shell, type alarmorig on
License File Overview
License File Remote Feature Activation (RFA) is a Web-based application that
enables the creation and deployment of License Files for all switches beginning
with R10. The License File enables the switch's software category, release,
features, and capacities. License Files are created using SAP order information
and/or current customer configuration information. Without a license file, the
switch does not provide normal call processing.
Without a valid license installed or a mismatched license:
1. The system generates a major alarm.
2. Depending upon the nature of the error, a 6-day countdown timer starts,
but call processing continues unchanged.
3. If the countdown timer expires, the switch runs in Administration Mode only,
and the call processing capability is limited to incoming and outgoing calls
only to pre-administered numbers.
NOTE:
With Release 10, the init login no longer has the capability to change
the customer options, offer option, or special applications forms.
Issue 6
December 2001
3-14