Rack-Mount Two Avaya Ip600 Cabinets - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
1 Install and Cable the Cabinet
Install the Avaya IP600 system cabinet

Rack-mount two Avaya IP600 cabinets

Mount port Cabinet B directly above processor Cabinet A.
1. Install the rectangular EMI Gasket over the right TDM/LAN bus cable
routing slot on the top of Cabinet A. Make sure open corner of the gasket
faces the rear of the cabinet. Once installed, cabinet B should rest on and
compress the gasket. See
1. Follow the steps to
2. Proceed to
Figure 1-14 on page
''Rack-mount the Avaya IP600 cabinet'' on page
''Check AC power and ground for Avaya IP600I'' on page
December 2001
1-30.
Issue 6
1-18
1-14.
1-19.