Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
4
Intuity AUDIX Digital Networking
Changing the number of administered remote users
Changing the number of administered
remote users
The number of administered remote users must be equal to or greater than the
number of mailboxes on all remote systems networked with this local system.
To change the number of administered remote users:
1. Start at the AUDIX command prompt screen.
2. Enter change system-parameters limits at the enter command prompt.
The System-Parameters Limits screen displays:
3. Enter the number of remote users in the Administered Remote field.
4. Press F3 to save the information in the system database.
The cursor returns to the command line, and the system displays the
following message:
Command Successfully Completed.
5. Enter exit or another administrative command.
Issue 6
December 2001
4-5