Access Methods; Via A Telnet Session - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
2 Connectivity and Access to DEFINITY ONE or IP600

Access methods

If it is desired to use the C-LAN interface instead, then the IP Services form will
change as illustrated in
on the Node Names form also.
change ip-services
Service Enabled
Type
ADJLK1 y
Figure 2-6. IP services form for CentreVu-CT on C-LAN
Access methods
Access DEFINITY ONE or IP600 through the following methods:
''Via a Telnet session'' on page 2-31
''Via a Web browser session'' on page 2-34
''Remotely using Avaya Site Administration'' on page 2-36

Via a Telnet session

Use this access method to:
Register DEFINITY ONE or IP600 with INADS
Activate license files
Execute GAS commands from a bash shell
Access DEFINITY ONE or IP600 SAT session
Set up the IP address for DEFINITY ONE or IP600 using setip command
See Appendix C, ''Connect to SAT session via Telnet''
connecting to SAT via Telnet.
NOTE:
The IP address differs depending on the type of physical connection
established. See
2-6. In this example, clan-1 must be administered
Figure
IP SERVICES
Local Local
Node Port
clan-1 5678
Appendix H, ''Installation Connectivity Quick
Page
Remote Remote
Node Port
centrevuserver 0
for information on
Issue 6
December 2001
2-31
1 of 1
Reference''.