Add Circuit Packs; Add Ip Trunk; Add Remote Office - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
6 Hardware Additions

Add circuit packs

Add circuit packs
When installing additional features or equipment, it may be necessary to install
additional circuit packs. For a list of allowable circuit packs, see
Packs and Circuit Modules'' on page
when adding features or equipment that require adding circuit packs.
1. Log onto the system and answer y to the Suppress Alarm Origination
question during login.
2. Install the circuit pack in the carrier.
3. Type change circuit-pack.
4. Verify that the circuit pack appears in the listing.
5. If the circuit pack code does not appear, type the code manually in the
proper slot.
6. Type test board long command to test the board.
7. Log off the system after the addition (and any required administration) is
complete.
For information about administering circuit packs and other equipment, see the
DEFINITY Enterprise Communications Server Release 10 Administrator's Guide
( 555-233-506).

Add IP trunk

For IP Media Processor set up instructions, refer to DEFINITY Enterprise
Communications System Release 10 Administration for Network Connectivity
(555-233-504).

Add remote office

DEFINITY ONE or IP600 can connect to the Avaya R300 Remote Office
Communicator (Avaya R300) in a remote office configuration. Avaya R300
operates like a simple switch at the remote site for connections made between
remote stations, as well as between remote stations and local access trunks. It
receives incoming PSTN dialed data calls and terminates them on the correct
data modem.
Using a standard 25 pair cable, you can connect Avaya R300 to a 110 punch
down wall field. Avaya R300 connects to a set of harmonica adapters by way of a
cable that adapts between the connection on the board and the harmonica
adapter and uses phantom power to power all analog telephones and DCP
telephones.
For information about installing and administering Avaya R300 Communicator,
see Getting Started with the Avaya R300 Remote Office (555-233-769) and MAX
3000 Installation and Basic Configuration Guide (555-233-768) .
1-37. This is a general procedure to use
Issue 6
December 2001
6-2
''Allowable Circuit