Configure Dhcp And Tftp Servers; Dhcp Server; Tftp Server - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
3 System Initialization

Configure DHCP and TFTP Servers

Configure DHCP and TFTP Servers

The DEFINITY ONE and IP600 systems are shipped with DHCP and TFTP
servers installed on the NT2314 processor circuit pack. These servers can be
used if the customer does not already have DHCP and/or TFTP servers on their
network. To use the embedded DHCP and/or TFTP servers, they must be
configured as described in this section.

DHCP server

IP addresses for IP telephones and other IP devices can be assigned manually.
Alternatively, IP addresses can be assigned automatically using a DHCP server.
Customers can use the DHCP server provided with the DEFINITY ONE or IP600
system or use a DHCP server already on their network.
!
CAUTION:
The DEFINITY ONE or IP600 DHCP server and another network DHCP
server should not both be configured to support the same IP devices at the
same time.
Enable the DHCP server
To enable the DHCP server on DEFINITY ONE or IP600:
1. From a Terminal Server session, click Start > Programs.
2. Double-click Administrative Tools.
3. Double-click Services.
4. Double-click DHCP server.
5. From the Startup type drop-down menu, select Automatic.
6. If you want to start the server immediately, click Start.
or
If you do not want to start the server immediately, click OK and close all
intermediate windows.
Servers that you selected a Startup Type of Automatic for will turn on every
time you reboot the system.
For information on administering DHCP see Chapter 4 in 4600 Series IP
Telephone LAN Administrator's Guide , 555-233-507. This document is included
on the R10 CD.

TFTP server

A TFTP server is needed for downloading license files and software updates.
Customers can use the TFTP server provided with the DEFINITY ONE or IP600
system or use a TFTP server already on their network.
Issue 6
December 2001
3-2