Administer Definity One Or Ip600 - Avaya DEFINITY ONE Installation And Upgrades

Internet protocol communications server
Hide thumbs Also See for DEFINITY ONE:
Table of Contents

Advertisement

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
3
System Initialization

Administer DEFINITY ONE or IP600

Using a Local Command Line Interface (CLI)
The date and time can also be set via the command line interface similar to MS_
TM
DOS
. Only Avaya services logins can use this procedure. You will not be able
to set the time zone or automatic daylight change with this method, but updating
the time is possible. Perform a telnet to the LAC, and choose cmd. From a local
keyboard, mouse, and monitor, perform the following:
1. Click Start, Run on the desktop.
2. In the window, type telnet 192.11.13.6 , and click OK.
3. Login.
4. At the lac prompt, type cmd and press Enter.
5. At the cmd prompt, type date and enter date, for example 12/06/2001 ; then
press Enter.
The system displays the date.
6. At the cmd prompt, type time and enter time using a 24 hour clock, for
example 13:45 ; then press Enter.
The system displays the time.
NOTE:
The technician can also do this from the laptop using the nic card on the
front of the TN2314 board, and following the same procedure.
Remotely from the TSC
Remotely from the TSC, the date and time can be set after accessing the lac
prompt, and following the above procedure starting at step 4.
The desktop procedure can also be performed remotely by the TSC.
If the date and time has to be changed, use lucent2 or lucent3 to login.
1. At the lac prompt, type bash ; then press Enter.
2. At the definity-one prompt, type pcanywhere .
3. When the system says the process has started, you can launch Terminal
Server
wcsc, cms support. Left click Terminal Server
4. On the Terminal Server
5. Select Properties .
6. Check TCP/IP under the Connection info tab .
7. Click on the Settings tab.
8. Type in the ip address of the customer's system. This is located on the
Solution Element information page.
TM
on your PC. Terminal Server
TM
screen, right-click on the NETWORK icon.
TM
is located under Start, Programs,
TM
.
Issue 6
December 2001
3-22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip600

Table of Contents