Install Sneak Fuse Panels - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
1 Install and Cable the Cabinet
Install equipment room hardware for DEFINITY ONE

Install sneak fuse panels

Sneak current protection is required between the incoming RJ21X or RJ2GX
network interface and the system for both trunk and off-premises circuit packs.
The model 507B sneak current fuse panel, or equivalent, is recommended for
sneak current protection. See
Figure Notes
1. 507B sneak current protector
(price element code:
comcode 107435091
2. 25-pair male connector (In)
(comcode 846300994)
Figure 1-43. Model 507B sneak fuse panel
Figure 1-43.
Sneak
Current
Protector
507B
3. 25-pair female connector (Out) (comcode
846300994)
)
4. 220029 fuses (inside panel). Use a small
screwdriver to pry top cover off
Issue 6
December 2001
1-91