System Administration/Avaya Site Administration - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
2 Connectivity and Access to DEFINITY ONE or IP600

System administration/Avaya Site Administration

Starting an Avaya Site Administration session
The customer must dial into the system to establish a PPP connection, and then
start their Avaya Site Administration session. To set up a computer to dial into the
system, perform these steps:
1. Go to My Computer.
2. Double-click on Dial-Up Networking.
3. Double-click on Make New Connection.
4. Fill in the name field; the system should fill in the correct modem attached
to the PC; if not, choose the modem that is attached to the system.
5. Click Next.
6. Fill in the Area code and Telephone number for the system.
7. Click Next.
8. Click Finish in the window saying that the connection was created.
9. In the Dial-Up Networking window, right-click on your connection icon.
10. Left-click on Properties.
11. Click on the Server Types tab.
12. In the Type of Dial-Up Server drop-down menu, select PPP: Windows
2000, 95, NT 3.5, Internet .
13. Under Allowed network protocols , only TCP/IP should be checked.
14. Click OK, when finished.
15. Access the system by double left-clicking the connection icon.
16. On the Connect screen, enter the correct User name and Password .
17. Click Connect.
18. When the connection is established, a screen appears. Click on the
Continue box.
System administration/Avaya Site
Administration
Avaya Site Administration provides the standard Windows look and feel for
performing basic switch administration. This includes wizards, tabbed windows,
menus, and dockable windows. Customers who use Avaya Site Administration
may administer telecommunications equipment as only a portion of their job
responsibilities, and few will be expert users.
NOTE:
A login window bay appear saying that the connection was
successful.
Issue 6
December 2001
2-38