Verify The Software Version Number; Determine The Serial Number - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
3 System Initialization

Verify the software version number

Verify the software version number

The following procedure verifies the software version number with the CD-ROM
that shipped with the system.
1. From the bash prompt, type swversion and press
information about the version of software running on the system. The first
line displays a string like:Release=R010c.00.031.1, which shows the load
number of the software; in this case, load 31.
2. Remove the CD-ROM that shipped with the system in the door of the
cabinet. Verify that the load number stamped on the CD-ROM matches the
load number found in step 1.
3. If the load numbers match, determine the serial number. If the load
numbers do not match, the system software may need to be updated
before proceeding further.

Determine the serial number

1. From the bash prompt, type serialnumber and press
The serial number is read and displayed.
2. Ensure that the serial number matches the label on the front of the circuit
pack. If it does not match, use the serial number you obtained from step 1.
NOTE:
The serial number obtained in step 1 is the number embedded in the
firmware and must be used.
NOTE:
The license file must contain a serial number that matches the serial number
on your processor board. If it does not, you must obtain and install an new
license file. For instructions on how to do this, go to
http://www.Avaya.com/services/rfa.
Issue 6
December 2001
. This displays
ENTER
.
ENTER
3-5