Configuring Security Access Levels For Scopia ® Elite 6000 Mcu - Avaya Scopia Elite 6000 Administrator's Manual

Procedure
1. Log in to Equinox Management.
2. Click Devices, and click the name of the Scopia
Equinox Management displays the Scopia
3. Click the Certificate tab.
4. Click Upload.
Equinox Management displays the Upload certificates window.
5. Click Add, and browse to the certificates.
Repeat this step for all certificates.
Equinox Management displays a confirmation message after each certificate is uploaded.
6. Click Apply All.
Result
Equinox Management applies all security certificates.
Configuring security access levels for Scopia
MCU
About this task
®
Scopia Elite 6000 MCU offers configurable security access levels that enable and disable SSH,
FTP, and ICMP (ping) protocols.
By default, the security access level is set to High. It is recommended to set your security access
level to Maximum (which disables these protocols), except for the following situations:
• If you are performing either debugging or troubleshooting operations, SSH should be
enabled.
• If you are customizing your language settings, FTP should be enabled.
• If you would like control or error response messages to be sent, ICMP (ping) should be
enabled.
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited for
usage. For more information, consult your local reseller.
Procedure
1. Log in to Equinox Management.
2. Click Devices.
December 2017
Configuring security access levels for Scopia
Administrator Guide for Avaya Scopia
Comments on this document? infodev@avaya.com
®
Elite 6000 MCU instance.
®
Elite 6000 MCU instance window.
®
Elite 6000 MCU
® Elite 6000 MCU
®
Elite 6000
29