1
Safety and requirements for product use
1
Safety and requirements for product use
1.1
Safety
1.1.1
General safety information
Note
Damage to the product from incorrect handling.
• Switch off the supply voltage before mounting and installation work. Switch on
supply voltage only when mounting and installation work are completely finished.
• Never unplug or plug in a product when powered!
• Observe the handling specifications for electrostatically sensitive devices.
1.1.2
Intended use
The valve terminal MPA-C is intended for installation in machines or automated systems and may be
used only as follows:
– in excellent technical condition,
– in original status without unauthorised modifications; only the conversions or modifications
described in the documentation supplied with the product are permitted,
– within the limits of the product defined by the Technical data (
– in an industrial environment.
If used together with additional commercially available components, such as actuators, the specified
limits for pressures, temperatures, electrical data, torques etc. must be observed.
Note
In the event of damage caused by unauthorised manipulation or other than intended
use, the guarantee is invalidated and the manufacturer is not liable for damages.
8
Appendix A.1),
Festo – GDCV-MPAC-EN – 1407NH – English