♦ Silicone paste for ignition coil sealing hoses ⇒ Electronic
Catalogue of Original Parts
– Detach hose -2- from air filter housing -1-.
– Loosen hose clamp -3- and remove air deflector.
– Pull off -1- air filter housing upwards from the ball pin.
– Disconnect plug connections -2-.
– Remove screws -1-.
– Press extractor -T10530- into the bore of the ignition coil -1-
as far as it can go.
– Tighten the nut -2- in -direction of arrow- so that the extractor
-T10530- stays firm in the bore of the ignition coil.
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
91