Skoda Rapid NH 2013 Maintenance, Workshop Manual page 153

Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
– Press the button -1- 4 times.
The remaining kilometres and days until the next inspection serv‐
ice appear in the display -2-.
The "Wrench" symbol appears in the display for approx. 10 s and
the number of remaining days and number of kilometres until the
next inspection service is displayed.
First of all, the number of remaining days and the number of kil‐
ometres until the next oil change service is shown, after pressing
the button -1- again, the number of the remaining days and num‐
ber of kilometres is displayed until the next inspection service.
If the "Wrench symbol" -D- appears in the display for approx. 10
s in position -A- No. -1-, this means an oil change service is nee‐
ded.
A - Difference between the service interval display
B - "Clock" symbol and the number of remaining days until the
next inspection service is displayed.
C - Remaining kilometres and days until the next inspection serv‐
ice.
D - "Wrench" indicates inspection service
At the same time, the number of remaining days and the number
of kilometres is displayed until the next inspection service is dis‐
played.
Once the oil change service is reached, after the ignition is switch‐
ed on, the flashing "Wrench" symbol -D- will appear for approx.
20 s in the display with the following message:
♦ "OIL CHANGE"
If the "Wrench symbol" -D- appears in the display for approx. 10
s in position -A- No. -2-, this means a service is needed.
Once the inspection is reached, after the ignition is switched on,
the flashing "Wrench" symbol -D- will appear for approx. 20 s in
the display with the following message:
♦ "INSPECTION"
For vehicles with Information display from MY 2014
149
6. Electrical System