Skoda Rapid NH 2013 Maintenance, Workshop Manual page 99

– Remove air filter housing upwards.
– Unscrew the screws -1- from the air filter lower part.
– Remove bottom part of the air filter and take out air filter ele‐
ment.
Installing
– Check housing and water drainage for contamination and
clean as required
⇒ "3.15.2 Remove and install air filter element, 1.0 l TSI en‐
gines", page 94 .
– Insert the centred air filter element -2- into mount on the upper
part of the air filter -1-.
– Locate the air filter lower part -3- on the air filter upper part
-1-.
– Bolt together the lower and upper part of the air filter with
screws -1-, and tighten to the specified tightening torque.
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
95