Skoda Rapid NH 2013 Maintenance, Workshop Manual page 101

– Unscrew the screws -1- from the air filter bottom part.
– Carefully release the locking tabs -arrows- on the air filter up‐
per part (risk of breakage).
– Remove air filter top part and take out air filter element.
Installing
– Make sure that the housing, air mass meter, and water drains
are not soiled; clean if needed
⇒ "3.15.7 Cleaning air filter housing", page 101
– Insert the air filter element -3- into mount on the air filter upper
part -4-.
– Position air filter bottom part -2- on air filter top part -4- and
screw on with screws -1-.
– Locate the air ducts on the air filter housing -1-.
– Fit on hose clamps -3- and -4-.
– Locate the air filter housing -1- on the ball pins and press on.
– Locate the air intake hose -2- on the air filter upper part -1-.
Tightening torque
Fixing screws
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
.
Nm
1.5
97