Skoda Rapid NH 2013 Maintenance, Workshop Manual page 118

Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
– Shorten the vent pipe to the dimension -a-, so that it does not
touch the bottom of certain ATF bottles.
Cut dimension to length -a-: 210 mm.
Note
The dimension -a- is measured on the shaft (starting with the
green area in the detail) of the adapter for oil filling - VAS 6262A- .
Caution
♦ The filling hose and the adapter - VAS 6262- or -
VAS 6262A- must be clean and the ATF must not be
mixed with other oils!
4.2.2 Drain ATF
– Position drip tray, e.g. -VAS 6208- under the gearbox.
WARNING
Wear safety goggles.
– Unscrew the ATF inspection plug -A-.
– Release the overflow tube -C- (5 mm Allen key) and drain re‐
maining ATF.
– Drain the ATF.
– Install overflow tube -C- with 5mm Allen key and tighten to 2
Nm.
4.2.3 Fill with ATF
Note
Follow all the instructions and conditions for changes
⇒ page 111 .
114
4. Gearbox