Skoda Rapid NH 2013 Maintenance, Workshop Manual page 33

For each oil change service:
♦ Check the use by date of the first aid kit.
♦ Ask the customer if he wishes a wiper blade change.
♦ Ask the customer if he wishes a topping up of the washer fluid (cleaning and antifreeze agent).
♦ Inform the customer about any defects which were found during the inspection.
Work involved
– Change the engine oil and oil filter
– Adding multiple-purpose additive for diesel engines - only applies to some countries
– Adding multiple-purpose additive for petrol engines - only applies to some countries
– Check that Škoda Connect services work - vehicles with PR number EL2 and EL3
– Check that Škoda Connect services work, enable workshop mode - vehicles with PR
number EL2 and EL5
– Check the brake pads and brake discs
– Reset service interval display for oil change
– Create an entry in the DSP (digital service schedule)
– Complete the next service date sticker and affix the sticker to the side of the dash panel
(on the driver's side)
– Disable workshop mode, check that Škoda Connect services work, vehicles with PR
number EL2 and EL5
– Check that Škoda Connect services work - vehicles with PR number EL2 and EL3
– Complete and attach service mirror tag to the interior rear-view mirror (certain countries
only)
– Hand customer the completed and signed form
– Give the customer the printed DSP record - vehicles with active DSP (Digital Service
Schedule)
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Chapter
⇒ "3.10 Drain off engine oil and top up", page 63
⇒ "3.20 Multi-purpose additive for diesel engines", page 109
⇒ "3.19 Multipurpose additive for petrol engines", page 107
⇒ "6.21 Škoda Connect services", page 167
⇒ "6.21 Škoda Connect services", page 167
⇒ "5.1 Inspecting thickness of front and rear brake pads/linings", page 116
⇒ "6.10 Resetting service interval display (SID) ", page 148
⇒ "6.21 Škoda Connect services", page 167
⇒ "6.21 Škoda Connect services", page 167
Valid for vehicles in MY 2013
Maintenance - Edition 06.2018
29