Skoda Rapid NH 2013 Maintenance, Workshop Manual page 93

– Loosen the hose clamps -1- and -2- and remove the air pipe.
– Disconnect plug connections -2-.
– Remove screws -1-.
– Press extractor -T10530- into the bore of the ignition coil -1-
as far as it can go.
– Tighten the nut -2- in -direction of arrow- so that the extractor
-T10530- stays firm in the bore of the ignition coil.
– Remove ignition coil with extractor -T10530- in
-direction of arrow- out of the camshaft housing.
– Undo nuts from the extractor -T10530- and remove from the
bore of the ignition coil.
– Using the extractor -T10530- remove the other ignition coils
out of the camshaft housing in sequence.
– Unscrew spark plugs with spark plug wrench e. g. -3122 B-
and remove.
– Screw in new spark plugs with spark plug wrench e. g. -3122
B- and tighten to tightening torque ⇒ page 90 .
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
89