Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
– Hold the button -2- on the windscreen wiper lever pressed for
longer than 1 second. This will show the information display of
the »MAIN MENU«. Observe the instructions
– Select the »Setup« option with the -B- button, briefly press this
button and then select the »service interval option (Service.
info).«
– Display information about the remaining kilometres and days
until the next inspection service.
The following is shown for 10 s in the information display:
Oil change ... km / ... days
Inspection ... km / ... days
Is switched on after switching on the ignition in the information
display "Oil change in ... km or ... days." Then an oil service is due.
As soon as the oil change service has been reached, the following
message is displayed after turning on the ignition:
♦ "Oil change now"
Is switched on after switching on the ignition in the information
display "Inspection in ... km or ... days" Then an inspection is due.
As soon as the inspection has been reached, the following mes‐
sage is displayed after turning on the ignition:
♦ "Inspection now!"
6.10.2
Reset service interval display in MY
2013
The service interval display is reset with the vehicle diagnosis,
measuring and information system -VAS- together with the cor‐
responding diagnostic cable ⇒ Vehicle diagnostic tester.
The service interval display can also be reset with the buttons in
the dash panel insert/on the windscreen wiper lever
⇒ page 150
.
Reset the service interval display with the buttons on the dash
panel insert or windscreen wiper lever
WARNING
♦ This work sequence cannot be carried out on vehicles, for
which no service message or only a pre-warning is dis‐
played on the display of the dash panel insert.
– Switch off ignition.
– Hold the button -3- pressed and simultaneously switch on the
ignition.
– Release button -3- and within 20 seconds, press button -1-
once briefly.
After a short period of time the display switches back to a normal
illustration.
For vehicles with information display
– Switch on ignition.
150
6. Electrical System
⇒ page 144
.