Skoda Rapid NH 2013 Maintenance, Workshop Manual page 65

– Disconnect plug connection -1-.
– Unlock catches -arrows-, remove air guide pipe.
– Press release buttons on the hose -1- to remove the activated
charcoal filter.
– Unscrew screws -arrows- and pull out, pull off hose for crank‐
case ventilation.
Note
If one or more O-rings are damaged, replace the hose for the
♦
crankcase ventilation.
Wet new O-rings with engine oil prior to installation!
♦
– Unclip the electric wiring harness -arrows-.
– Unscrew screws -1, 3- and remove toothed belt guard -2- for
coolant pump toothed belt.
– Turn the crankshaft on the fixing screw of the belt pulley crank‐
shaft in direction of running of the engine and check the
complete toothed belt for the following conditions -arrows-:
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
61