Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
Replace the fastening elements
– Remove the fastening elements -1- upwards.
– Press the new fastening elements back into the appropriate
guides.
Note
The fastening elements -1- must not be greased or otherwise lu‐
bricated before installation.
– The remaining steps for installing the air filter housing are as
above in reverse order.
Tightening torque
Fixing screws for upper and lower part of the air filter
-1-
Fixing screw for air filter housing -2-
3.15.3
Replacing air filter element for 1.2 l TSI
and 1.4 l TSI petrol engines starting from
MY 2016
Removing
– Detach air guide hose -2- from air filter top part -1-.
– Loosen hose clamps -3- and -4-.
– Pull off -1- air filter housing upwards from the ball pin.
– Pull the air ducts off the air filter housing -1-.
– Remove air filter housing -1- and lay aside turned by 180°.
96
Nm
1.5
5