Skoda Rapid NH 2013 Maintenance, Workshop Manual page 159

6.10.4 Reset service interval display from MY
2016
WARNING
The vehicles are equipped with a two-channel service interval
display with a different service message.
This two-channel service interval display must be reset in 2
steps.
Reset service interval display with the vehicle diagnosis, meas‐
urement and information system -VAS-
The service interval display can also be reset with the buttons in
the instrument cluster ⇒ page 155
Reset service interval display with the vehicle diagnosis, meas‐
urement and information system -VAS-
When resetting the service interval display with vehicle diagnosis,
measurement and information system -VAS- , note the following
instructions:
WARNING
When resetting the service interval display with vehicle diag‐
nosis, measurement and information system -VAS- , note the
following:
Remove the checkmark at the "work with targeted fault finding"
function for the vehicle identification on the display of the ve‐
hicle diagnostic tester.
The display of the vehicle diagnosis tester displays the follow‐
ing "Now targeted fault finding has been cancelled, only targe‐
ted functions and self-diagnosis are available. Would you like
to perform a diagnosis without targeted fault finding?"
Confirm function with "Yes".
• When changing the engine oil, the service interval display
must be reset for the engine oil change.
On the diagnostic unit, then select: "Dash panel insert - J285"
→ "Functions of the dash panel insert" → "17- Service events"
and next "Oil change service (variable)" → or "Oil change serv‐
ice".
Continue to follow the instructions on the diagnostic unit.
• During the inspection, the service interval display must be
reset for the inspection.
On the diagnostic unit, then select: "Dash panel insert - J285"
→ "Functions of the dash panel insert" → "17- Service events"
and next "Examination" or "Inspection".
Continue to follow the instructions on the diagnostic unit.
• During the inspection associated with the engine oil
change, both service interval displays must be reset.
Reset the service interval display with the button in the instrument
cluster
When resetting the service interval display using the button in the
instrument cluster, observe the following information:
⇒ page 155 .
.
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
155
6. Electrical System