Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
– Hold button -3- pressed and at the same time turn on the ig‐
nition until a "wrench" symbol is displayed on the dash panel
insert display:
– Press button -1-.
The "Inspection" display is now reset.
Vehicles with an information display
– Switch off ignition.
– Switch on the hazard lights by pressing the button -arrow- in
the central console of the dash panel.
– Hold button -3- pressed and simultaneous switch on the igni‐
tion until the following message is displayed on the dash panel
insert display:
Really reset inspection service?
– Press the option "OK" in the information display to confirm the
reset.
The "Inspection" display is now reset.
154
6. Electrical System