– Use an extraction hose with end part to extract as much brake
fluid as possible from the brake fluid reservoir.
WARNING
Drained (used) brake fluid must never be used again.
– Set back switch -2- from -vacuum- down.
– Switch off the compressed air distribution, herewith the brake
filling and bleeding device , e.g. -VAS 5234- , is no longer op‐
erative.
WARNING
Drained (used) brake fluid must never be used again.
Change brake fluid in slave cylinder - vehicles with manual gear‐
box
– Remove engine cover.
– Remove air filter ⇒ Relevant Engine; Rep. gr. 23 or ⇒ Rele‐
vant Engine; Rep. gr. 24 .
– Activate the filling function of the brake filling and bleeding de‐
vice , e.g. -VAS 5234- , as follows:
– Detach connecting hoses -2- and -7- from catch pan -1-.
– Detach the filler hose with quick-action coupling -5- from the
device connection point -6-.
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
121
5. Chassis