Skoda Rapid NH 2013 Maintenance, Workshop Manual page 94

Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
– Coat the ignition coil sealing hoses -arrow- with silicone paste
for ignition coil sealing hoses from the ⇒ Electronic Catalogue
of Original Parts .
– Place all ignition coils loosely into the spark plug shaft.
– Align the ignition coils so that the fixing screws can be screwed
in.
– Press ignition coils onto the spark plugs evenly by hand (do
not use an impact tool).
– Screw in the ignition coils screws -1- and tighten to required
tightening torque ⇒ page 90
– Connect connector -2-.
– Locate the air pipe.
– Fit on hose clamps -1- and -2-.
Tightening torque
Spark plugs in the cylinder head
Screw for ignition coil with output stage
3.14.4 Replace spark plugs - 1.6 l MPI engines,
starting from MY 2016
Special tools and workshop equipment required
♦ Spark plug wrench, e.g. -3122 B-
♦ Tool for removing the ignition units -T10530-
90
.
⇒ Rep. gr. 28 ; Ignition system; Summary of compo‐
nents - ignition system
Nm
8