Skoda Rapid NH 2013 Maintenance, Workshop Manual page 91

3.14.1 Replacing spark plugs up to MY 2015
Removing and Installing spark plugs ⇒ Engine; Rep. gr. 28 .
3.14.2 Replace spark plugs - 1.0 l TSI engines
– Remove air filter housing
⇒ "3.15.2 Remove and install air filter element, 1.0 l TSI en‐
gines", page 94 .
– Remove air guide pipe ⇒ Rep. gr. 21 ; Charge-air system .
– Disconnect connectors -2- from ignition coils.
– Unscrew screws -1- of ignition coils.
– Press extractor -T10530- into the bore of the ignition coil -1-
as far as it can go.
– Tighten the nut -2- in -direction of arrow- so that the extractor
-T10530- stays firm in the bore of the ignition coil.
– Remove ignition coil with extractor -T10530- in
-direction of arrow- out of the camshaft housing.
– Undo nuts from the extractor -T10530- and remove from the
bore of the ignition coil.
– Using the extractor -T10530- remove the other ignition coils
out of the camshaft housing in sequence.
– Unscrew spark plugs with spark plug wrench e. g. -3122 B-
and remove.
Note
Observe the disposal instructions!
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
87