Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
– Screw the thread plug -1- of the brake filling and bleeding de‐
vice , e.g. -VAS 5234- , onto the brake fluid reservoir.
1 - Thread plug
2 - Compressed air distribution
3 - Filler hose with quick-release coupling
– Position cock -1- on -A-.
– Switch on the compressed air distribution, herewith the brake
filling and bleeding device , e.g. -VAS 5234- , is operative.
– Check brake fluid pressure using the pressure manometer
-1-.
Brake fluid pressure = 0.2 Mpa.
– Set the filling pressure e.g. by turning the regulating valve
-2-.
122
5. Chassis